Casting Quality provide professional service for our customers. Just Send us the drawing, we will supply one products.
Or sample by carrier to us, we will copy same part too.
Sand Casting, Lost Wax Precision Investment Casting, Shell Casting, Permanent Mold Casting… …
Experienced inspection team of Casting Quality conducts the entire quality control procedure from raw material to finished products. All inspectors are well trained and have rich product knowledge & inspection
Most design engineers don’t have experience about actual production, their design will be complicated in actual production, and the part will be very expensive too. When we get the design, we will analysis the possibility in production, and provide much proposal to make everything easy and convenient.
Casting Quality provide professional service for our customers. Just Send us the drawing, we will supply one products.
Or sample by carrier to us, we will copy same part too.
brasion-Resistant Cast Iron ASTM A532 Class II type D Designation 20% Cr-Mo
Abrasion-Resistant Cast Iron ASTM A532 Class I type D Designation Ni-HICr
Abrasion-Resistant Cast Iron ASTM A532 Class III type A Designation 25% Cr
Abrasion-Resistant Cast Iron ASTM A532 Class I type B Designation Ni-Cr-LoC
Abrasion-Resistant Cast Iron ASTM A532 Class I type A Designation Ni-Cr-HIc
Abrasion-Resistant Cast Iron ASTM A532 Class I type C Designation Ni-Cr-GB
Abrasion-Resistant Cast Irons ASTM A532 Class II type B Designation 15% Cr-Mo
Stainless Steel GX40NiCrSiNb38-19 (EN 1.4849) in standard of EN 10295 and DIN 17465
Stainless steel GX40CrNiSi25-20 (EN 1.4848) in EN 10295 and DIN 17465
Bronze Lid Castings made by investment casting or sand casting, CNC machinign is avaliable too.
Bronze Clample casting is made by investment casting or sand casting for pluming industry.
Leaded Red Brass C83450 in ASTM B30, ASTM B584 and ASTM B763 for casting purpose
Leaded Red Brass C83800 in ASTM B30, ASTM B271, ASTM B505, ASTM B584 and ASTM B763 for casting purpose
Ductile Iron V.S. Cast Steel in valve industry. how to choose material for valve body
The differences between forging and casting, The advantages and disadvantages of forging and casting
Stainless Steel impellers for pump industry, made by investment casting process with CNC machining and balancing. The casting material can be CF8M/CF3M/CF8/CF3/CA15/SS2205
Gray iron valve castings made by lost foam casing process or sand casting process, suitalbe for butterfly valve, gate valve and strianer, check valve casting production
stainless steel castings pump housing is made by investment casting process with CNC machining,
Cobalt Rotor Casting is made by investment casting process with CNC machining. Cobalt stellite alloy and UNS R30001/R30404/R30106
Stainless Steel Cover Casting, investment casting process, stainless steel casting with CNC machining.
Duplex stainelss steel castng, ASTM A890/995 5A, ss2507 stainless steel castings pump impeller by investment casting process.
Stainless Steel Casting – Cap, made by investment casting, the casting has good dimension and gap shaps in castings. stianless steel 304/316 is popular for casting
Star ring gear require precision gear teeth, investment casting is a good process to get a precision tolerance gear castings, its metal can be stainles steel casting or carbon steel casting or alloy steel casting.
Stainless Steel water flow meter Casting for measuring water flow. Casted Stainless Steel 304 or 316 or 201, made by investment casting process.
stainless steel lid castings will be made by investment casting process, the casting can be stainless steel 304/316/CF8M/CF8 or SS410. stainless steel casting has good dimensions.
Austenitic Stainless Steel castings include: stainless steel CF8M, stainless steel SS316, stainless steel CF8, stainless steel 304, stainless steel 304L(CF3), stainless steel steel 316L (CF3M)
Stainless steel castings, stainless steel valve body, SS316 is same as CF8M.
304 Stainless Steel Casting, Pump Impeller casting, investment casting or sand casting, lost wax precision casting process.
Silicon Brass CuZn16Si4-C(CC761S), CuZn16Si4-B(CB761S) in EN 1982
Alloy Steel G17CrMo5-5 (EN 1.7357) in EN 10293 and EN 10213
Alloy Steel G20Mn5 (EN 1.6220) in casting standard of EN 10293, EN 10340 and EN 10213-3
Martensitic stainless steel GX4CrNi13-4 (EN 1.4317) in EN 10283.
Austenitic Ductile Iron: A439 Type D-2 ,A439 Type D-2B ,A439 Type D-2C ,A439 Type D-3, A439 Type D-3A ,A439 Type D-4 ,A439 Type D-5 ,A439 Type D-5B, A439 Type D-5S
Duplex Stainless Steel CD6MN (3A, UNS J93371) in ASTM A995 and ASTM A890
Duplex Stainless Steel CD3MCuN (UNS J93373) in ASTM A890
Duplex Stainless Steel CD4MCuN (UNS J93372) in ASTM A890 and ASTM A995
Gray Iron in ASTM A278 for Pressure-Containing Parts for Temperatures Up to 650°F (350°C)
Ductile iron grades in ASTM A536: Gr 60-40-18, Gr 65-45-12, Gr 80-55-06, Gr 100-70-03, Gr 120-90-02,Gr 60-42-10,Gr 70-50-05,Gr 80-60-03
Grade 80-40 [550-275] UNSD50400 in ASTM A148 for Sand Casting and Investment Casting
Stainless steel CA6NM (UNS J91540) in ASTM A743 and ASTM A352 and ASTM 487; E3N in ASTM A757 casting standard
Carbon Manganese steel LCC (UNS J02505) in ASTM A352 casting standard
Stainless Steel CC50 (UNS J92615) in ASTM A743 Casting Standard
Stainless Steel CB30 (UNS J91803) in ASTM A743 Casting Standard
Stainless Steel CA15M (UNS J91151) in ASTM A743 and ASTM A487 Casting Standard
Stainless Steel CE30 (UNS J93423) in ASTM A743 casting standard
Stainless Steel CN7MS ( UNS J94650) in ASTM A743 and ASTM A744 standard.
Duplex Stainless Steel CD3MWCuN (UNS J933380, 6A) in ASTM A351, ASTM A890 and ASTM A995 standard
Stainless Steel CG3M (UNS J93000) in ASTM A351, ASTM A743 and ASTM A744
Stainless steel CK3MCuN (UNS J93254) in ASTM A351 and ASTM A743 and ASTM A744 standard.
Stainless Steel CF10SMnN (J92972) in ASTM A351 and ASTM A743 standard
Duplex Stainless Steel CE8MN (2A) in standard of ASTM A890, ASTM A950, ASTM A351
Stainless Steel CN7M (UNS N08007) in ASTM A351/ ASTM A743/ ASTM A744 standard
liner tolerance for precision investment casting (lost wax casting) in ICI USA standard.
Aluminum EN-AC-42200 (EN AC-AL Si7Mg0.6) in EN 1706
Casted bearing sleeve bushing made by centrifugal casting with machining.
GX2CrNi19-11 (EN 1.4309) is defined in standard EN 10213 and EN 10283 and ISO 11972,
Stainless Steel X5CrNi18-10 (EN 1.4301) in EN 10088-3
Stainless Steel GX5CrNi19-10 (EN1.4308) in EN 10213 and EN 10283 and ISO 11972
ASTM A518 Grade 3, Corrosion-Resistant High-Silicon Iron
ASTM A518 Grade 2, Corrosion-Resistant High-Silicon Iron
ASTM A518 Grade 1, Corrosion-Resistant High-Silicon Iron
Stainless Steel CF8M in ASTM A351 and ASTM A743 and ASTM A744 standard.
Pump Cover for liquid ring vacuum pumps.
Casting Metal: stainless steel CF8M/CF8, SS316/304, other casting metal is available too.
Casting manufacturing: Precision Investment Casting, lost wax casting
Bucket Teeth/Dippers for Excavator made by precision lost wax investment casting. carbon steel castings.
Duplex Stainless Steel GX2CrNiMoN22-5-3(EN 1.4470) in EN 10283 and EN 10213 and ISO 11972, X2CrNiMoN22-5-3 (EN 1.4462) is similar grade in EN 10088-3
Stainless Steel Pump Head, Pump Housing, Pump casing, made by precision investment casting with CNC machining.
Volute Casting for Pumps, made by precision investment casting, the materiel is stainless steel or carbon steel. OEM made for pump manufacturers.
Stainless steel backup rings/flanges are made by prevision investment casting process. its; for connection between HDPE pipe adapter.
Stainless steel CF3MN (316LN) in casting standard ASTM A743 and A351
Nickel Aluminum Bronze C95800 in ASTM B148 and ASTM B505 for casting purpose.
Leaded Red Brass C83600 in ASTM A145 and ASMT B584 and ASTM B505 and ASTM B62 for casting purpose.
Generic Classification of Copper Alloys, it’s easy to classify copper/brass alloy based on the first number.
ASMT A890/A890M – 18a Standard Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application
Alloy Steel C12A ( UNS J84090) in standard of ASTM A217 for casting purpose
Stainless Steel CH20 (SS309) in standard of ASTM A351 and ASTM A743 for casting purpose
Stanless steel CA15 (SS410) in ASTM A217, ASTM A487 and ASTM A743 for casting purpose
Stainless Steel CF3M (SS316L) in ASTM A351, ASTM A743 and ASTM A744 standard for casting purpose
Stainless Steel Pump Suction Cover, made by lost wax precision investment casting process.
Casting Material: stainless steel CF8/CF8M, 304/316
Cast Iron Wheels was made by sand casting process, it’s also named as guide rollers or Track casters for railway, Flanged Track Wheels, Flange Track Roller,Industrial Track wheels,Steel Rail Wheels.
Pump Bearing Spider, Pump Bearing Retainer for bushing assembly.
Casting Process: Lost Wax Precision investment casting
Material: Stainless steel casting SS304(CF8), SS316 (CF8M) or others.
BS 3146 Type CLA 1, Gr. A/Gr. B/Gr. C carbon steel for investment casting
ISO 9477 GR 840-1030 alloy steel for Sand Casting and Lost Wax Precision Investment Casting
ISO 9477 GR 620-820 alloy steel for Sand Casting and Lost Wax Precision Investment Casting
ISO 9477 GR 540-720 alloy steel for Sand Casting and Lost Wax Precision Investment Casting
ISO 9477 GR 410-620 alloy steel for Sand Casting and Lost Wax Precision Investment Casting
Hardware fittings casting made by investment casting, the materiel can be carbon steel or stainless steel. Door Hinge and others.
BS3100 Gr. A6 carbon steel for Sand Casting and Lost Wax Precision Investment Casting
BS3100 GR. A5 carbon steel for Sand Casting and Lost Wax Precision Investment Casting
BS3100 Gr. A4 carbon steel for Sand Casting and Lost Wax Precision Investment Casting
BS3100 Grade A3 carbon steel for Sand Casting and Lost Wax Precision Investment Casting
BS3100 Gr. A2 carbon steel for Sand Casting and Lost Wax Precision Investment Casting
BS3100 GR. A1 carbon steel for Sand Casting and Lost Wax Precisioin Investment Casting
Grade 70-36 [485-250] (J03501) in ASTM A27 standard for Sand Casting and Lost Wax Precision Investment Casting
Grade 70-40 [485-275] (J02501) in ASTM A27 standard for Sand Casting and Lost Wax Precision Investment Casting
Grade 65-35 [450-240] (J03001) in ASTM A27 standard for Sand Casting and Lost Wax Precision Investment Casting
Grade U-60-30 [415-205] (UNS J02500) in ASTM A27 standard for Sand Casting and Lost Wax Precision Investment Casting
Grade N-2 (03500) in ASTM A27 for Sand Casting and Lost Wax Precision Investment Casting
Grade N-1 (J02500) in ASTM A27 for Sand Casting and Lost Wax Precision Investment Casting
Stainless steel 321 for Sand Casting and Precision Investment Casting process
Spindle Housing for Shaft or Stem or bearing by Sand Casting. the Material can be: Ductile Iron Casting GGG40, GGG50,GGG60,GGG70, GGG80
Super Duplex Stainless Steel CE3MN (SS2507) in ASTM A890/A895 standard for casting purpose
CK20 (SS310) Stainless steel in ASTM A743 and A351 for casting process
GS-60 (1.0558) in DIN 1681 for Sand Casting or Lost Wax Precision Investment Casting
GS-52 (1.0552) in DIN 1681 for Sand Casting or Lost Wax Precision Investment Casting
GS-45 (1.0446) in DIN 1681 for Sand Casting or Lost Wax Precision Investment Casting
GS-38 (1.0420) in DIN 1681 for Sand Casting or Lost Wax Precision Investment Casting
The Unified Numbering System – UNS – was developed by ASTM and SAE to correlate different numbering systems for commercial metals and alloys.
GE360 (1.0597) in EN10293 for Sand Casting or Lost Wax Precision Investment Casting
GE320 (1.0591) in EN10293 for Sand Casting or Lost Wax Precision Investment Casting
GE300 (1.0558) in EN10293 for Sand Casting or Lost Wax Precision Investment Casting
GE270 (1.0454) In EN10293 for Sand Casting or Lost Wax Precision Investment Casting
GS240 (1.0455) carton steel in EN10293 for Sand Casting or Lost Wax Precision Investment Casting
GE240 (1.0446) in EN10293 for Sand Casting or Lost Wax Precision Investment Casting
GS200 (1.0449) in EN10293 for Sand Casting or Lost Wax Precision Investment Casting
GE200 (1.0420) in EN10293 for Sand Casting or Lost Wax Precision Investment Casting
340-550, 340-550W in ISO3755 for Sand Casting or Lost Wax Precision Investment Casting
270-480,270-480W in ISO3755 for Sand Casting or Lost Wax Precision Investment Casting
230-450;230-450W in ISO3755 for Sand Casting or Lost Wax Precision Investment Casting
200-400;200-400W in ISO3755 for Sand Casting or Lost Wax Precision Investment Casting
ZG 340-640 in GB/T 11352 for Sand Casting or Lost Wax Precision Investment Casting
Carbon Steel ZG310-570 in GB/T 11352 for Sand Casting or Lost Wax Precision Investment Casting
Carbon Steel ZG270-500 in GB/T 11352 for Sand Casting or Lost Wax Precision Investment Casting
Carbon Steel ZG230-450 in GB/T 11352 for Sand Casting or Lost Wax Precision Investment Casting
Carbon Steel ZG200-400 in GB/T 11352 for Sand Casting or Lost Wax Precision Investment Casting
Glass fittings castings are made by lost wax precision investment casting process, the material will be stainless steel CF8(SS304) and CF8M (SS316) mainly. Generally the mirror polishing will be necessary. Casting Quality also provide precision machining based on purchase design.
Carbon Steel Rocker Arm Shaft are made by Precision Lost Wax Investment Casting process. Casting Quality also provide sand casting or shell casting service for those castings. The material will be carbon steel, alloy steel or stainless steel.
Ductile Iron EN-GJS-400-18 is in standard EN1563: 2011, it has EN-GJS-400-18 LT, EN-GJS-400-18 RT and EN-GJS-400-18.
Aluminum casting through investment casting are mainly used in special industry such as the International Space Station, satellites, diving suits, helicopters, motorcycle components, and both military and commercial electronics. It’s different with other methods (sand casting and die casting or permanent mold casting). Its thickness can meet 1.0mm,
SS304 is equal to casting grade CF8; SS316 is casting grade CF8M. CF8 and CF8M is defined in ASTM A743 or ASTM A351 standard. 304 or 316 is the popular name in steel plate and pipe usage.
Specifications for Investment Casting Tolerances in standard of ISO 8061
AISI 8620 and AISI8630 are Nickel Molybdenum steel for high strength by investment casting, which contain chromium, nickel and molybdenum. Those two steel grade will be supplied as heat treatment condition. AISI 8620: IC 8620, ASTM A-732 GR 13Q; AS 1444 GR 8620/8620H, EN10084, 1.6523 20NiCrMo2-2; JIS G4103/G4052 SNCM 220; UNS G86200/H86200 AISI 8630: UNS […]
Chrome Nickel Molybdenum Steel AISI 4330/4340 AISI 4330: IC 4330, ASTM A-732 GR 9Q, 10Q, IC 4340
Diesel Engine Cylinder Liner Centrifugal Casting with Precision Machining: Lathe turning and grinding. Casting Material: Grey Iron HT250 /GG20 /FC25 Brinell hardness of 241-293 Cylinder liner is a central working partto be fitted into an engine block to form a cylinder. It is the most important functional parts to make up the interior of an engine.some […]
In a low-alloy steel casting, the alloying elements are present in percentages greater than the following: Mn, 1.00; Si, 0.70; Cu, 0.50; Cr, 0.25; Mo, 0.10; V, 0.05; W, 0.05; and Ti, 0.05. Limitations on phosphorus and sulfur contents apply to low-alloy steels as well as carbon steels unless they are specified to be different […]
Carbon Steel ANSI 1030( 2A, 2Q, IC1030), 1040(3A,3Q, IC1040), 1050(4A,4Q, IC1050) in ASTM A732
Casting Method: Sand Casting or Centrifugal Casting Precision Machining: Lathe turning and grinding. Material: Grey Iron HT250; GG20; FC25 Cylinder liner is a central working part
Stainless steel CF3(SS304L) in ASTM A351, ASTM A743 and ASTM A744 standard.
Stainless steel Adapter is made by precision investment casting (silica sol lost wax) process, the detailed metal grade : CF8/CF8M/CF3/CF3M etc. As expert in metal casting field, Casting Quality Industrial can provide most metal castings, include stainless steel and carbon steel, gray iron and ductile iron. Our manufacture process will be: Sand Casting Investment Casting […]
Duplex Stainless Steel CD4MCu (UNS J93370) in ASMT A351 and ASTM A890
Stainless steel Trolley is made by precision investment casting (Water glass) process, it can be very precision dimension without any machining. All castings will be inspected by special tools as buyers requirement.
With Precision Lost Wax Investment Casting process, Tractor transmission shifting forks is made from carbon steel 1045 or alloy steel, this casting should be heat treatment after machining and assemble with gearbox for speed adjustment.
17-4PH Impeller Casting, Screw or Auger by investment casting process with cnc machining
Precipitation-Hardening Stainless Steel CB7CU-1 (17-4PH) in ASTM A747
ASTM A216 Grade WCB carbon steel for casting purpose, chemistry and mechanical property
Abrasion-Resistant Cast Iron ASTM A532 Class II type A Designation 12% Cr
Stainless Steel CF8 (SS304) in ASTM A743, ASTM A351 and ASTM A744
Aluminum Base, manufactured by Chinese Permanent Mold Casting Method ( also named Gravity Casting). Material: A356 T6. Good CASTING tolerance per ISO8062 CT7.
Casting Method: Precision Investment Casting. Casting Material: Carbon Steel A148. Casted sprocket teeth with quench process, no need machining.
Sand Casting process with CNC machining; Cast grey iron ( gray iron) HT200/GG20/GG25 material; Pump Guiding Device Fittings with static balance, Paint protected
Valve Bonnet, Presion Investment Casting method Very perfect surface finish. Casting Material: Stainless Steel CF8M/CF8/CF3/CF3M, SS304/SS316. Valve fittings castings include valve body, valve bonnet, valve handwheel, valve handle, valve disc and so on.
Counterweigth for Elevator or lift machinery, also named Cast iron Counter weight block; Casting material is Cast Grey Iron; Sand Casting method or lost foam casting method.
Cast Iron Impeller castings for water pumps. The mainly material is cast gray iron GG20/HT200/HT300. Sand casting method with CNC machining and static balance.
Counterweight for forklift and crane. Cast material is Grey Iron HT200/250/GG20 or ductile iron; Unit weight from 5kgs to 10000kgs; Surface primer paint finished. Cast method is lost foam casting (vacuum moulding process) or sand casting.
By Lost Foam Die Casting Method, converyer screw castings has material of carbon steel or corrosion resitant steel. Other castings such as flywheel and pulley also can be casted by sand casting method. Spiral Blades / Shaft and Spiral assemblies for Screw Conveyors, converyer impeller castings. Our manufacture processes: 1. Sand Casting, Resin Sand Casting […]
Investment casting method by soluble glass process, Carbon steel castings, Chinese foundry.Soluble Glass process is more cheaper than sodium silicate shell process, but also can get a precision dimension. Generally, we use soluble glass method to make some carbon steel castings.
Investment casting with sodium silicate shell process, the flywheel have a excellent surface finish and presion dimensions. The casting material is stainless steel 304/CF8(1.4401). Other stainless steel or carbon steel can be choice in China foundry.
Counterweight include Elevator Weihgts, forklift Weights, Stage Weights, Scaffold Weights, Pump Jack Weights, Door Weights, Test Weights, Crane Weights, Box Fabrication, Balast & Fill, Kits & Assemblies, Stack & Weld, Steel Fabrications & Weldments, Frame Weights, Marine Weights .
Pulley Casting, cast iron or carbon steel material, sand casting or investment casting with CNC machining
Fence accessories are generally made by sand casting or investment casting method, the material can be carbon steel or cast iron. fence fittings is used for gate, fence,handrail and so on. The type include frence, gate, handrail, balusters,bushing, spear and other home decoration.
Investment Castings, carbon steel material, hot dipped surface. Thread machining. The castings unit weight is 230g. China professional foundry use water glass investment casting method to make Handrail Railing Accessories.
Y type strainer with cast iron casting valve body and stainless steel screen. Size from DN25 to DN300, nominal pressure: PN10/PN16; Face to face: DIN 3202/F1; Body flange: drilling DIN2533;
What is Green Sand Casting? Green Sand Casting is mainly differed with resin sand casting . The mould sand is taken from rivers, and then put some others in sand to increase their viscidity. Green sand is an aggregate of sand, bentonite clay, pulverized coal and water. Its principal use is in making molds for […]
Check Valve, also named no return valve, one way valve or clack valve, we can supply cast ductile iron or gray iron body valve. Valve Body: ductile iron or grey iron; Valve Disc: Ductile iron or stainless steel; PN10/PN16 pressure rate; Type: Swing type; Standard: DIN or BS; 100% hydraulic pressure testing;
Investment castings pipe fittings, Stainless steel ss304/ss316/ss316L/ss321 material. CNC machining. Stainless Steel pipe fittings casting, such as stainless steel elbow, stainless steel tee, union, socket and stainless steel coupling.
Butterfly valve include wafer type butterfly valve and lug style butterfly valve. The valve body and disc material is ductile iron or cast gray iron. PN10/16 Cast iron valve Size: DN50 – DN600; 100% hydraulic pressure testing; Epoxy coating or primer painting. EPDM/NBR/VITON valve seat.
Butterfly valve include wafer type butterfly valve and lug style butterfly valve. The valve body and disc material is ductile iron or cast gray iron. PN10/PN16 Pressure rate Size: DN50 – DN600; 100% hydraulic pressure testing; Epoxy coating or primer painting.
Butterfly valve include wafer type butterfly valve and lug style butterfly valve. The valve body and disc material is ductile iron or cast gray iron. PN10/16 Cast iron valve Size: DN50 – DN600; 100% hydraulic pressure testing; Epoxy coating or primer painting. EPDM/NBR/VITON valve seat.
Butterfly valve include wafer type butterfly valve and lug style butterfly valve. The valve body and disc material is ductile iron or cast gray iron. Size: DN50 – DN600; 100% hydraulic pressure testing;
Method: Sand Casting, Material: Carbon Steel, stainless steel or low alloy steel. Weight: max to 30tons. Original from Chinese foundry
Casting Quality Industrial offers a wide selection of Standard U shaped bolts, available in a variety of shapes and sizes, grades, and materials. Designed for a multitude uses, U-Bolts can be found around the home, commercial building projects, and industrial building applications. While a variety of materials are used to manufacture U-Bolts, the most common […]
Professional supplier of fastners products, such as bolts, nuts, gasket and stud, we only supply high strength products, not low value fasteners. Fastener Nuts: Flange Nut, Round Nut, Hex Heavy Nut, Nylon Insert Hex Nut,Heavy Hex Nut,
Investmeng casting with stainless steel material, include SS301, SS304, SS304L, SS316, SS316L and SS321 stainless steel. Investment casting method can get a good surface finish and precision dimensions, you only make a slight machining to reach your requriement. The unit weight from 10gs to 100kgs.
Malleable iron part castings include pipe fittings and construction fittings, fence fittings and scaffolding fittings. Sand casting method and hot dipped surface finish. CNC machining.
We use investment casting and sand casting method to supply widely range stainless steel castings. Materials include 300 series alloys steel 303, 304, & 316, 400 series alloys steel of 410, 416, & 440C, & precipitation hardening alloys of 17-4, & 15-5.
Malleable iron fittings, nipple, mateiral is malleable iron 300-6. Black surface or hot dipped surface(white). Sand Casting , hot dipped with thread Machining. Standard: EN 10242, DIN 2950
Malleable iron fittings, bend , mateiral is malleable iron 300-6. Black surface or hot dipped surface(white). Sand Casting , hot dipped with thread Machining. Standard: EN 10242, DIN 2950
Malleable iron fittings, hex nipple , mateiral is malleable iron 300-6. Black surface or hot dipped surface(white). Sand Casting , hot dipped with thread Machining. Standard: EN 10242, DIN 2950
Malleable iron fittings, 270 , mateiral is malleable iron 300-6. Black surface or hot dipped surface(white). Sand Casting , hot dipped with thread Machining. Standard: EN 10242, DIN 2950
Malleable Iron Pipe Fittings Tee, malleable iron material with hydraulic testing.
Malleable iron fittings, 90R , mateiral is malleable iron 300-6. Blacknsurface or hot dipped surface(white). Sand Casting , hot dipped with thread Machining. Standard: EN 10242, DIN 2950
Malleable iron fittings, mateiral is malleable iron 300-6. Blacknsurface or hot dipped surface(white). Sand Casting , hot dipped with thread Machining. Standard: EN 10242, DIN 2950
Malleable iron fittings, mateiral is malleable iron 300-6. Blacknsurface or hot dipped surface(white). Sand Casting with Machining. Standard: EN 10242, DIN 2950
Malleable iron fittings, mateiral is malleable iron 300-6. Blacknsurface or hot dipped surface(white). Standard: EN 10242, DIN 2950
Malleable iron fittings, mateiral is malleable iron 330-6. Blacknsurface or hot dipped surface(white). Standard: EN 10242, DIN 2950
Butterfly valves with wafer type connection. Sand Casting Valve Body: Grey cast iron GG25; Sand Casting Disc: Ductile Iron GGG40 (Nickel plated) ; investment casting Disc: Stainless steel;
Sand Casting marine fittings, carbon steel castings material. China professional marine fittings supplier, we also make much inspections: magnetic particle testing, ultrasonic testing, dimension report, chemistry component and mechanical property report. Pyramid mooring anchor is generally used in for fresh and salt water condition. Pyramid Anchors work well in a hard, rocky or sandy bottom. […]
Sand Casting type Mushroom Anchor marine fittings. Black coating or red primer coating. A mushroom anchor will normally sink in the silt to the point where it has displaced its own weight in bottom material,
Method: Sand Casting anchor body with welded handle. Material: Carbon steel, mild steel or manganese steel Magnetic testing Passed. Chemistry component and mechanical property report provided.
Grey Iron Specifications DIN EN1561. Compare GG serires with EN-JL grades. this material is suitable to sand casting production. Grey Cast iron is a casting alloy, iron and carbon based, the latter element being present mainly in the form of lamellar graphite particles. The properties of grey cast iron depend on the form and distribution of […]
Stainless Steel include austenitic stainless steel martensitic stainless steel and ferric stainless steel. this material is suitalbe to sand casting and investment casting method. Austenitic steels have austenite as their primary phase
Din En 877 or BS EN 877 Cast Grey Iron Pipes and Fittings. All grey iron Pipes produced by centrifuagal technology are mainly used in drainpipe systems through a flexible linkage. All pipes confirm to the standard of EN877, ASTM A888, ISO6594 and DIN19522. Size from DN40 to DN300
BS EN877 Cast iron pipes and fittings, their joints and accessories for the evacuation of water from building. Requirements, test methods and quality assurance This European Standard applies to cast iron pipeline components used for the construction of discharge systems for buildings and of drains, normally as gravity systems.
Valve body castings, Sand Casting method, ASTM A217-WC9 Cast steel for high temp service.
Method: Precision Investment Casting Material: Carbon steel A216 WCB castings Castings weight to 48kgs Chinese investment casting foundry manufacture.
Grey Cast Iron (Gray iron) HT200, HT250, HT300, HT350 in Chinese Standard GB/T 9439
Carbon steel have a good content of carbon, so it is easy to casting. especially A216 WCB. It is important to clarify the meaning of carbon steel in the generic sense and in the more narrow context used in this report. The term steel is usually taken to mean an iron-based alloy containing carbon in […]
Duplex Stainless steel has two phase micro-structure consisting of grains of Ferritic and Austenitic stainless steel. It is mainly used in pump fittings and oil field. Casting Quality Industrial can produce SAF2205 DUPLEX STAINLESS STEEL castings.
Cast Iron is individed to four types: gray iron, ductile iron, malleable iron, vermicular cast iron, abrasion-resistant cast iron and corrosion resistant cast iron. Generally, we mainly use sand casting method to make iron castings, such as green sand casting, resin sand casting, Sodium silicate sand casting , lost foam casting and centrifugal casting. Gray […]
ASTM A995/A995M for Castings, Austenitic-Ferritic (Duplex) Stainless Steel
Duplex stainless steel castings, sorted by standard. Duplex Stainless steel has two phase microstructure consisting of grains of Ferritic and Austenitic stainless steel. It has a better strength and corrosion resistance property than stainless steel 304/316. Duplex stainless steels have lower nickel and molybdenum contents than their austenitic counterparts of similar corrosion resistance.
Material: Ductile Iron GGG40 Method: Sand Casting with CNC machining. Differential mechanism casting parts from China foundry. We not only make the castings but also the precision machining based on buyers’ drawings.
Method: Sand Casting and CNC machining; Material: ductile Iron or Gray Iron; Automobile fittings from China foundry, include differential mechanism, hub and others.
Material: ductile iron GGG50 Method: Sand casting with epoxy coating. Ductile iron pipe fittings series. Flange adaptor is suitalbe to connect different pipe. We also supply assembly flange adaptor, include NBR rubber ring, hot dipped fastener and epoxy coating.
Ductile Iron Fittings: Reducer, flanged joint, ISO2531, EN545; Ductile Iron GGG50 material made by Lost Foam Casting;
Method: Sand Casting, Resin Sand Casting; Material: Ductile Iron GGG40 or Cast Iron GG25 Fire hydrant fittings, include valve body, cover and valve disc, all valve parts from China foundry.
Method: Investment Casting, Material: Carbon Steel ASTM A216 WCB, Ball valve castings from China foundry, we also can make cnc machining based on buyer’s drawings.
Backup IPS Rings for HDPE Adapter Material: ductile iron ASTM A536 or stainless steel CF8M Epoxy powder coating surface for DI Flange. Backup ring also named as convert backup flange, made from China foundry.
Method: Sand Casting, CNC Machining Material: Ductile Iron Casting or Gray Iron Casting Flywheel castings from Chinese foundry.
Metarial: Ductile Iron GGG40 Method: Sand casting and CNC machining. Balance choiced. As chinese foundy, our Flying wheel is mainly used in automobile industry.
Method: Sand Casting, Resin Sand Casting Material: Ductile iron GGG40 Wheel hub with CNC machining. Original from China foundry.
Method: Lost Foam Casting, Sand Casting Standard: ISO2531, EN545 Type: 22.5 flange elbow. Size from DN50 to DN2000
Method: Sand Casting with CNC machining Material: Ductile iron GGG40, Gray Iron GG25 Size from DN50 to DN600. Valve fittings include: butterfly valve body, gate valve body, check valve body, globle valve body, valve disc and valve bonnet, and so on.
Material: Ductile Iron ASTM A536 45-12 Method: Sand Casting Surface: Red epoxy painting for DI flange. Ductile Iron Backup rings in sizes from 3” up to 36”, flange standard is ASTM B16.5
Material: Ductile Iron GGG50 Method: Lost foam casting Valve body for gate valve, the bolt holes are casted. We also cast the contact face, so no need any machining. If the epoxy is necessary, we can supply you finished valve body.
Flange for ductile iron fittings. Method: Lost Foam Casting Material: Ductile iron GGG50 Standard: ISO2531 Original: China No need to any machining and drilling. PN10 or PN 16 pressure.
Sand Casting method, Material is cast iron include gray iron, ductile iron. Max unit weight can be reach 500kgs. we also make CNC machining based on buyers’ drawing.
Castings — System of dimensional tolerances and machining allowances Mainly indicate the tolerance of castings, such as sand casting, investment casting, die casting and other casting method. Applies to cast metals and their alloys produced by various casting manufacturing processes. Is applicable both to general tolerances and/or required machining allowances
Sand Casting products, marrine fittings, material is cast carbon steel. Nondestructive inspection is choiced. Unit weight from 10kgs to 20tons.
Off Drill type Anchor NOMINAL WEIGHT(KG) A B C D E G 227 1205 1330 725 865 395 495 454 1520 1675 915 1090 500 625 680 1770 2120 1050 1250 575 740 908 1950 2340 1160 1380 630 815 1136 2100 2520 1250 1485 680 875 1360 2230 2655 1330 1580 725 930 1590 […]
GB11579-89 Light weight anchor Dimensions: NOMINAL WEIGHT(KG) A B C D E 14 770 730 222 444 288 23 885 840 252 508 328 34 965 915 279 559 366 45 1055 1000 310 610 396 70 1185 1130 348 686 450 90 1205 1140 360 737 480 140 1345 1270 414 825 540 […]
The AC-14 balance anchor is one of the most versatile of the high holding power anchors. It is used in shipping and aquaculture industry. dimensions: NOMINAL WEIGHT(KG) A B C D E F G J 56 612 298 376 555 109 170 115 […]
AC14 anchors suitable for Merchant Fleet, Moorings or the Offshore Industry. Rated high holding power, this is a “snug” stowing stockless type ships bow anchor. the Class certificates can be supplied, and usually made from cast steel and the surface is black or galvanized finish.
High holding power pool anchor, TW type. 1. Mechanical Property and Chemistry Analysis. 2. Magnetic Particle Testing 3. Penetrating Testing 4. Ultrasonic Testing 5. Radiographic Testing 6. Spectrometer 7. Certification: LR, DNV, ABS, BV, NK and GL. NOMINAL WEIGHT(KG) A B C D E F 20 369 374 144 240 136 402 […]
High holding power pool anchor with balance 1. Mechanical Property and Chemistry Analysis. 2. Magnetic Particle Testing 3. Penetrating Testing 4. Ultrasonic Testing 5. Radiographic Testing 6. Spectrometer 7. Certification: LR, DNV, ABS, BV, NK and GL. Balanced Pool Anchor Pool anchor with balance NOMINAL WEIGHT(KG) A B C D E F 60 590 […]
High holding power pool anchor. 1. Mechanical Property and Chemistry Analysis. 2. Magnetic Particle Testing 3. Penetrating Testing 4. Ultrasonic Testing 5. Radiographic Testing 6. Spectrometer 7. Certification: LR, DNV, ABS, BV, NK and GL. NOMINAL WEIGHT(KG) A B C D E F 12 323 275 250 65 383 155 20 386 325 […]
Small bruce anchor mainly used for boats and fish ships, made by stainless steel or other good steels. The type from 1kg to 100kg. Large Size are made by welded. NOMINAL WEIGHT(KG) A B C D E F 500 1827 1280 500 1303 606 2188 1500 2648 1854 723 1888 878 3172 3000 3409 2388 […]
high holding power anchor, welded type. Stevpris anchor Widely used on oil drilling platforms. With super holding power and good workmanship.
High Holding Power Delta Anchor, Welded type. High-grade manganese steel used in the construction of the Delta anchor gives it maximum tensile strength. Unique shank profile and ballasted tip make the Delta anchor self-launching. Low centre of gravity and selfrighting geometry ensure that the Delta anchor will set immediately
Bottom roller ( glass roller) mainly used for solid solution furnace and glass manufacturing line with the temperature 1050 ℃ ~ 1200 ℃ temperature zone. We use centrifugal casting method to ensure a reliable thermal strength and corrosion properties of heat, according to user-supplied drawings and the use of temperature .
Radiant tubes for heat system, include w type radiant tubes and u type radiant tubes. the pipe is make by centrifugal casting. Centrifugal Castings, with CNC machining and welding. Suitalbe non water cooler tunnel furnace rollers and anneal tower furnace roller, or water cooled tunnel furnace rollers. Metal Industry: Steelworks: roller for slab casters. rollers for […]
Radiant tubes for heat system, include w type radiant tubes and u type radiant tubes. the pipe is make by centrifugal casting.
Centrifugal Castings, with CNC machining and welding. Suitalbe non water cooler tunnel furnace rollers and anneal tower furnace roller, or water cooled tunnel furnace rollers.
Sink roller for continuous galvanizing line (CGL) Roller is served in about 500 degree molten zinc. Material is SS316, out diameter is 600/610/650/800mm
Roller products, HP40Nb or ZG40Cr25Ni35Nb material Centrifugal Casting, Sand Casting body, Forging stem
Lost Foam Casting or Sand Casting Method Alloy steel castings, GX40CrNiSi25-20,40Cr25Ni20Si2,GX30CrNiSiNb24-24,GX25CrNiSi20-14, GX30CrSi6 or according to customers’ requirements
Sand Casting Flywheel Material: Carbon steel castings WCB NC machining and painting. Unit weight: 56.5kgs Origin: China foundry
Threaded Fittings Nominal pressure: 1.6MPa Be suitable object: WOG Be suitable temperature: -60–450°F (-51–232°C) Precision casting material:SS304、SS316 All fittings dimension confirm to ANSI B 16.3.
Nominal pressure: 1.6MPa Be suitable object: WOG Be suitable temperature: -60–450°F (-51–232°C) Precision casting material:SS304、SS316 All fittings dimension confirm to ANSI B 16.3. Thread confirm to NPT,BSPT,DIN etc..
Specification: 130 Tee Surface: Black or hot dipped. Standard: EN 10242, DIN 2950 Material: malleable iron EN1562, ISO5922 Thread: ISO7/1 Size: 1/4″-4″ Size Dimensions (mm.) Inch mm A 1/8 6 19 1/4 10 21 3/8 10 25 1/2 15 28 3/4 20 33 1 25 38 1 1/4 32 45 1 1/2 40 50 2 […]
Standard: EN 10242, DIN 2950 Material: malleable iron EN1562, ISO5922 Thread: ISO7/1 Specification: 90 elbow Size: 1/4″-4″ Size Dimensions (mm.) Inch mm A 1/8 6 19 1/4 8 21 3/8 10 25 1/2 15 28 3/4 20 33 1 25 38 11/4 32 45 11/2 40 50 2 50 58 21/2 65 69 3 80 […]
Auminium Alloy Castings Method: Permanent Casting Material: Aluminim Casting. Castings Weight from 0.5kgs to 50 Kgs. To get a good surface finish, we use permanent casting method to do aluminium products.
Sand Castings with black paint. Mothed: Sand Casting, Green Sand Casting or Resin Sand Casitng Material: Cast Ductile Iron castings, Cast Gray Iron castings. Standards: En124
Method: Sand Casting Material: Gray Iron, Ductile Iron A drum brake is a brake in which the friction is caused by a set of shoes or pads that press against the inner surface of a rotating drum. The drum is connected to a rotating wheel. Brake drum castings are made up of S.G. cast iron […]
A drum brake is a brake in which the friction is caused by a set of shoes or pads that press against the inner surface of a rotating drum. The drum is connected to a rotating wheel. Brake drum castings are made up of S.G. cast iron which has high strength, ductility, shock and wear […]
Method: Sand Casting, Resin Sand Casting Material: Gray Iron , Ductile Iron Good surface finish and strictly dimension control
Method: Sand Casting, Resin Sand Casting Material: Gray Iron , Ductile Iron Good surface finish and strictly dimension control
Method: Sand Casting whith CNC machining. Material: Carbon Steel Machinery parts, unit weight :106kgs
Method: Sand Casting whith CNC machining. Material: Carbon Steel Machinery parts, unit weight :106kgs Origin: China foundry
Method: Investment casting Material: Carbon Steel castings, 230-450 Hot dipped. Weight: 1.30kgs. Investment casting products. Our manufacture processes: 1. Sand Casting, Resin Sand Casting 2. Investment Casting, Lost Wax Casting or Precision Casting 3. Lost foam casting 4. Die casting. 5. Permanent Casting. 6. CNC Machining. The material included: cast gray iron, ductile iron, […]
Method: Investment Casting Material: Carbon Steel Casting Instead of malleabe iron casting, we can get a good dimension and lower price.
Method: Investment Casting Material: Carbon Steel Castings 230-450 Unit weight: 400gs Instead of malleabe iron casting, we can get a good dimension and lower cost.
Material: Cast iron gray iron GG20. Method: sand casting or green sand casting. Unit weight: 1.35kgs Specification: DN50 valves body castings.
Material: Cast iron gray iron. Method: sand casting or green sand casting. Unit weight: 1.35kgs SPC: DN50 valve body.
The Engineering and physical properties of cast iron wary with the type of iron; the designer must match the engineering requirements with al the properties of the specific type of cast iron being consiered. Machinability, e.g., is significantly affected by the type of cast iron specified. Gray cast iron is the most machinalbe; the white […]
Cast iron is classified in to fire basic types: each type is generally based on graphite morphology as following:Gray Iron
Ductile Iron
Malleable Iron
Compacted Graphite Iron
White Iron
Cast Iron Valve Body made by sand casting process. grey cast iron or ductile iron material, machning is avaliable.
Our foundry have enough equipments to make sand casting and investment casting and die casting, such as sand conditioning of sand casting, electric furnace, cupola, molding machine of sand casting, heat treatment and so on. For different products, we should find a competitive manufacture casting process.
A sand casting is also divided resin sand casting and green sand casting. sand casting is produced when molten metal is poured at atmospheric pressure into a cavity formed in a compacted molding sand. In typical ferrous casting, the mold would be bonded with 6 to 8 percent western bentonite mulled with 2 to 3 […]
The sand casting comprison in green sand casting, resin sand casting.Sodium silicate bonded sand casting and dry mould casting
Investment casting( precision casting, also named lost wax casting ) is an advanced metalforming process used to produce metal parts of the highest quality, functionality and cost-effectiveness. Investment casting( precision casting) is a one-to-one process in which one disposable pattern produces one metal part. When combined with modern production knowledge and technologies, Investment casting( precision casting) can be […]
Method: Investment casting Material: Carbon Steel casting Hot dipped. Weight: 1.30kgs. Investment casting products.
Method: Investment Casting Material: Carbon Steel Casting Instead of malleabe iron casting, we can get a good dimension and lower price.
flying wheel, carbon steel material,Method: Sand Casting whith CNC machining.
Machinery parts, unit weight :106kgs
Cast Iron with Nodular Graphite Unalloyed and Low Alloy Grades – DIN 1693 , ductile iron standard
DIN 1691-1985 Flake graphite cast iron (grey cast iron) Properties.pdf, cast iron stardand, DIN 1691 has been superceded by DIN EN 1561. Grade GG 25 is now called EN-JL 1040 or EN-GJL-250, The equivalent ASTM standard and grade is A 48 Grade 40B.
The Ideal of cast iron with ductility, long sought by metallurgists, was realized with the introduction of ductile iron in 1948. Acclaimed to be one of the most significant metallurgical developments in this century, ductile iron has had an increasing impact in many industries. Ductile iron has ductility – as the name implies – and […]
ANNEALING The primary purpose of annealing is to soften hard steel so that it maybe machined or cold worked. This is usually accomplished by heating the steel to slightly above the critical temperature, holding it htere until the remperature of the piece is uniform throughout, and then cooling at a slowly controlled rate so that […]
Tempering is possible because of the instability of the martensite, the principal constituent of hardened steel. Low temperature draws, from 300′ F to 400’F (150′ – 205′ C)
Method: Sand Casting, Resin Sand Casting Material: Gray Iron , Ductile Iron Good surface finish and strictly dimension control
ASTM A48 / A48M – 03(2008) Standard Specification for Gray Iron Castings, casting material standard.
HARDENING Hardening is the process of heating a piece of steel to a temperature within or above its critcal range and then cooling it in rapidly. If the carbon content of the steel is known, the proper temperature to which the steel should be heated may be obtained by reference to the iron – iron […]
Ductile iron, also called ductile cast iron, spheroidal graphite iron, or nodular cast iron. While most varieties of cast iron are brittle, ductile iron is much more flexible and elastic, due to its nodular graphite inclusions.
Mothed: Sand Casting, Green Sand Casting or Resin Sand Casitng Material: Cast Ductile Iron, Cast Gray Iron. Standards: En124 Manhole covers (sometimes known as inspection covers) are the metal covers that are used to cover over large or small holes created in the road surface to gain access to the equipment underneath.
Steels having less than the eutectioid amount of carbon (less than 0.77%) are known as hypoeutectoid steels. Consider now the transfomation of such a material represented by cooling along line y – y’ in Fig 1.1. At high temperatures, the material is entirely austenite, but upon cooling enters a region where the stable phases are […]
The understanding of heat tratment is embraced by the broader study of metallurgy. Metallurgy is the physics, chemistry, and engineering related to metals from ore extraction to the final product. Heat treatment is the operation of heating and cooling a metal in its solid state to change its physical properties. According to the procedure used, […]
The material in A128 Standard is suitable to sand casting and investment casting method. Standard Specification for Steel Castings, Austenitic Manganese This specification covers Hadfield austenitic manganese steel castings and alloy modifications.
Method: Permanent Casting Material: Aluminim Casting. Castings Weight from 0.5kgs to 50 Kgs. To get a good surface finish, we use permanent casting method to do aluminium products.
This Standard material is suitable to sand casting and investment casting. ISO 3755:1991 Cast carbon steels for general engineering purposes This International Standard specifies requirements for eight grades of heat-treated cast carbon steels for general engineering purposes. Four of the grades have a restricted Chemical composition to ensure uniform weld-ability. 1.2 In cases where castings […]
Steel casting, sand casting, investment casting standard, ASTM A217 WC1,WC4,WC9,WC5,WC6,WC11,…. Abstract This specification covers steel castings, martensitic stainless steel and alloys steel castings for valves, flanges, fittings, and other pressure-containing parts intended primarily for high-temperature and corrosive service. The grades of steels covered here are: Grade WC1, Grade WC4, Grade WC5, Grade WC6, Grade WC9,
Manhole cover is made by sand casitng process with ductile iron material.
Method: Sand Casting, Resin Sand Casting Material: Gray Iron , Ductile Iron Good surface finish and strictly dimension control
Method: Sand Casting, Resin Sand Casting Material: Gray Iron , Ductile Iron Good surface finish and strictly dimension control
Method: Investment Casting Material: Carbon Steel Weight: 50 grams We use investment casting method to get the small products, it has a very thin thickness, so easy to distort.
Mothed: Sand Casting, Green Sand Casting or Resin Sand Casitng Material: Cast Ductile Iron, Cast Gray Iron. Standards: En124
From the carbon content of material, we can divide iron and steel. Cast irons typically contain 2-4 wt% of carbon with a high silicon concentrations and a greater concentration of impurities than steels. Iron (Fe) is not a high-purity metal commercially but contains other chemical elements which have a large effect on its physical and […]
Method: Sand Casting, Resin Sand Casting Material: Abrasive-resistant cast irons Abrasion resistant cast iron materials are white, carbide-solidified cast iron materials
The pipe fittings products in casting method, are mainly stainless steel threaded pipe fittings, malleable iron pipe fittings, ductile iron pipe fittings. Stainless Steel Pipe Fittings: Material: ASTM A351 CF8/CF8M/CF3/CF3M, SS304/304L, SS316/316L, SS321
Fasteners are manufactured in a wide range of materials from common steel to titanium, plastic and other exotic materials. Many materials are further separated into different grades to describe specific alloy mixtures, hardening processes, etc. In addition, some materials are available with a variety of coatings or plating to enhance the corrosion resistance, or appearance […]
Keyword: Sand Casting, Investment Casting, Valve Casting, Steel Casting, Metal Casting As professional Supplier of casting products in China, We are specialized in producing valve parts products, such as valve body, valve disc, valve bonnet , valve hand-wheel, valve flange and valve seat. Generally, the valve products include gate valve , check valve, butterfly valve, […]
Method: Sand Casting with machining. Material: Aluminium The Aluminium impeller is a fittings for induction machine ( electric motor) to cool the temperature. It have light weight and good strength.
ASTM A27/A27M standard specification for steel casting, Grade N-1, Grade N-2, Grade U-60-30 [415-205], Grade 60-30 [415-205], Grade 65-35 [450-240], Grade 70-36 [485-250] and Grade 70-40 [485-275].
Method: Lost Foam Casting Material: Ductile Iron Casting We always comply with the latest version of the standard ISO 2531 or EN 545 to manufacture and supply DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES for PRESSURE PIPELINES.
Gate Valve Body made by Lost Foam Casting, grey iron casting or ductle iron casting
Method: Sand Casting, Resin Sand Casting Material: Carbon Steel Casting, Ductile Iron Casting Pump body, pump impeller, pump cover and other fittings, we are mainly do sand casting, investment casting products. We also provide fastener, such as carbon steel bolt, nut and gasket.
Method: Investment Casting, CNC Machining Material: Stainless Steel Casting, Carbon Steel Casting Weight: Max to 30kgs
Method: Investment Casting Material: Carbon Steel Casting, Stainless Steel Casting If necessary, we also supply ductile iron products by investment casting method. Pump fitting, include pump body, pump impeller and pump cover, are our mainly casting products. Some products are suitalbe for sand casting, you should compare the dimension tolerance and machining cost, to choice […]
Method: Investment Casting Material: Steel Casting, Stianless Steel Casting Max Weight: 30kgs Pump fittings casting, include pump body, pump impeller and others. We also provide forged fastener, such as bolt, nut and gasket.
Stainer Body Sand Casting with machining, cast grey iron or ductile iron materail, hydraulic testing is necessary.
Electric Arc Furnace is a furnace that heats charged material by means of an electric arc. Arc furnaces range in size from small units of approximately one ton capacity (used in foundries for producing cast iron products) up to about 400 ton units used for secondary steel making. Arc furnaces used in research laboratories and […]
Method: Resin Sand Casting Material: High Silicon Cast Iron This is a kind of product of cathode protection. Its theory is that connects the current of negative metal material or alloy with the protected metal body, with the exhausting and dissolving of negative metal material or alloy, protective current is transfused to protected metal body, this […]
Method: Resin sand casting, investment casting Material: Ductile Iron Casting, Steel Casting, Aluminium Casting Motor house,moter shell, motor cover and other fittings, we use resin sand casting and investment casting to get a good products.
Method: Sand Casting, Investment Casting Material: Ductile Iron Casting, Grey Iron Casting, Steel Casting Surface finish: Painted, Oiled
Method: Sand Casting Material: Carbon Steel Casting, Ductile Iron Casting, Gray Iron Casting Surface Finish: Oiled, blasting, Anti-rust Weight: Max to 150kgs Pls inquiry us with your detailed drawings , we will supply you a good price.If the products need to be machinined, we also have CNC and NC Lathe equipment to finish it.
Method: Sand Casting, Investment Casting Material: carbon steel, ductile iron Weight: Max to 50kgs
Method: Sand Casting, Resin Sand Casting Material: Ductile Iron GGG40, ASTM A536 65-45-12, Cast Iron Ductile Iron Pipe Fittings: ISO 2531, EN545. We also produced based on client’s drawings.
Method: Sand Casting Material: Ductile Iron Casting, Gray Iron Casting Weight: Max to 30kgs Our foundrymainly focus on the casting of valve and valve fittings, we use sand casting and investment casting to do many products based on client’s drawings.
Butterfly Valve Body Casting, madey by Sand Casting with machining and epoxy coating, Material: Ductile Iron GG40/GG45, Gray Iron GG25
Method: Investment Casting Material: stainless Steel ss304,ss316, ASTM A351 CF8/CF8M Investment casting is a good method to get precision dimensions and surface finish. pls send us your drawings with weight, we will quote you a good price.
Casting Method: Low Pressure Casting Casting Material: Aluminium alloy Low pressure casting uses positive pressure to move the molten aluminum into the mold quicker and achieve a finished product that has improved mechanical properties (more dense) over a gravity cast .
Specifications: 1) Dimensions: Max M200 2) Material: mild steel, alloy steel, 1035 steel, 1045 steel, 5140 steel, Stainless Steel 3) Heat treated to meet various grades of 8.8 and 10.9 4) Other material specifications available 5) Finish: bake paint, black oxide, zinc plated, phosphate and oil, zinc, zinc dichromate, electrophoresis,black oxide, hot galvanized, we can […]
Specifications: 1) Dimensions: Max M200 2) Material: mild steel, alloy steel, 1035 steel, 1045 steel, 5140 steel, Stainless Steel 3) Heat treated to meet various grades of 8.8 and 10.9 4) Other material specifications available 5) Finish: bake paint, black oxide, zinc plated, phosphate and oil, zinc, zinc dichromate, electrophoresis,black oxide, hot galvanized, we can […]
Specifications: 1) Dimensions: Max M200 2) Material: mild steel, alloy steel, 1035 steel, 1045 steel, 5140 steel, Stainless Steel 3) Heat treated to meet various grades of 8.8 and 10.9 4) Other material specifications available 5) Finish: bake paint, black oxide, zinc plated, phosphate and oil, zinc, zinc dichromate, electrophoresis,black oxide, hot galvanized, we can […]
Close cooperation between buyers and producers of forgings has always been a vital part of achieving the best possible product at the best possible cost. With recent major advances in forging methods and materials improvements, this collaboration is more critical than ever before. By keeping abreast of these advances, and working closely with the forger, […]
Method: Sand Casting Material: Bronze, Alloy. If you need carbon steel or stainless steel impeller, we will use investment casting to do. Pls send us the drawings with material and weight, we will quote you! An impeller is a rotating component of a centrifugal pump, usually made of iron, steel, bronze, brass, aluminum or plastic, […]
Casting Method: Lost Foam Casting, Investment Casting, Sand Casting Castomg Material: Carbon Steel We also supply high silicon cast iron by sand casting, pls send us your drawings.
There are a variety of methods to produce a given part. Each has its own set of advantages and disadvantages. Some of the important factors affecting the selection of a process include the following: – Quantity of the material required – Design of the part
Method: Investment Casting Material: Stainless Steel, SS304, SS316, CF8,CF8M Investment casting can get a good surface finish and precision dimension. it is suitalbe to do products which weight is less than 30kgs. Pls send you drawings with weight and meterial, we will quote you a competitive price.
Method: Invesment Casting, lost wax casting Material: Stainless steel SS304,SS316, CF8, CF8M Investment casting can get a good surface finish and dimension. So you only can machine little allowance to reach your requirement. If the mateiral change to steel, one cheaper investment casting can be adopted. Based on your drawings and detailed requirment, we will […]
Method: Sand Casting Material: Ductile Iron QT400-18LT/EN-GJS-400-18U-LT. Carbon Steel or Alloy Steel can be option.
Casting is a manufactureing process in which molten metal is poured or injected and allowed to solidify in a suitable shaped mold cavity. During or after cooling, the cast part is removed from the mold and then processed for delivery. Casting processes and cast-material technologies vary from simple to highly complex. Material and process selection […]
This specification covers carbon steel castings for valves, flanges, fittings, or other pressure-containing parts for high-temperature service and of quality suitable for assembly with other castings or wrought-steel parts by fusion welding. Covered here are three grades of carbon steel (Grades WCA, WCB, and WCC), the selection of which shall depend on the design and […]
Astm A536-84(reapproved 1999) Ductile Iron Castings
ASTM A351/A351M:standard specification for stainless steel casting
Method: Investment Casting, Lost Wax Casting, Precision Casting Material: Stainless Steel CF8,CF8M Thread: ASTM B1.20.1, NPT, BS21
Iron Comparison- Gray Iron and Ductile Iron in China, Janpen, American, Germany and others countries
gear casting material carbon Steel, Ductile iron or Stainless Steel, made by sand casting or investment casting.
Method: Sand Casting, Green Sand Casting or Resin Sand Casitng Material: Cast Ductile Iron, Cast Gray Iron. Standards: En124 General Road gullies, which require a hinged grating on top are designed to collect surface water from roads, parks, etc. Because of the high outlet position, the gully collects any silt or debris as the water […]
Method: Sand Casting, Resin Sand Casting, Green Sand Casting Material: Steel, Alloy Steel, Cast Iron. Weight: Max to 2Tons. Pump parts and accessories are components and devices used in the construction of pumps. A pump part may include an upstream and downstream bend element, sidestream, inlet guide vane, impeller, front and rear seals, diffuse, and […]
Method: Sand Casting Material: Malleable iron KTH300-6 Standard: EN10242, DIN, BS, ASTM
Method: Sand Casting, Investment Casting Material: Cast Iron, ductile iron, gray iron, Cast steel. Pump parts and accessories are components and devices used in the construction of pumps. A pump part may include an upstream and
Method: Sand Casting, Green Sand Casting , lost foam casting or Resin Sand Casitng Material: Cast Ductile Iron, Cast Gray Iron. Standards: En124 LOAD CLASSES En 124 A15KN test load Areas which can be used by pedestruabs and pedal cylists En 124 B125KN test load For use in footways, car parks and parking decks. En […]
Method: Sand Casting, Investment Casting or Lost Foam Casting Materal: Carbon Steel, Ductile Iron, Gray Iron and stainless steel. A Valve bonnet acts as a cover on the valve body. Generally made by casting ( Sand Casting or Invesment Casting). It is commonly semi-permanently screwed into the valve body. During manufacture of the valve, the […]
Method: Sand Casting, Lost Foam Casting Material: ductile iron GGG40, GGG50 Design Standard: EN545, ISO2531, BS4772, AWWA C153 Flange type connection.
Casting Method: Investment Casting ( Lost Wax Casting or Precision Casting) Material: Casted Stainless Steel, Casted Steel. Ball valve body casting with bolt hole. The strictly tolerance keep a good dimension, and also cut more cost in machining.
Specifications: 1) Dimensions: Max M200 2) Material: mild steel, alloy steel, 1035 steel, 1045 steel, 5140 steel 3) Heat treated to meet various grades of 8.8 and 10.9
Steel Anchor products as following: 1.TYPE A.B.C HALL ANCHOR 2. JAPAN STOCKLESS ANCHOR 3. POOL ANCHOR 4. MATROSOV ANCHOR 5. U.S.N. STOCKLESS ANCHOR 6. SPEKE ANCHOR 7. HHP STOCKLESS ANCHOR(AC-14) 8. DANFORTH ANCHOR 9. TWO FLUKES ANCHOR 10. TYPE M SPEKE ANCHOR 11. LIGHT WEIGHT ANCHOR 12. ADMIRALTY ANCHOR 13. BALDT STOCKLESS ANCHOR 14. […]
Product Analysis is the process of identifying, looking at or disassembling a product and identifying its main features. The aim is to understand more about a product and improve it in the future. Many factors influence the development of a product, some are listed below.
Die-casting is similar to permanent mold casting except that the metal is injected into the mold under high pressure of 10-210Mpa (1,450-30,500) psi . This results in a more uniform part, generally good surface finish and good dimensional accuracy, as good as 0.2 % of casting dimension. For many parts, post-machining can be totally eliminated, […]
How to control the lost wax casting : Casting size and shape determines the tolerance required to allow for process variables. Many process factors affect investment casting tolerances, such as: 1.Wax temperature
Mothed: Sand Casting, Green Sand Casting or Resin Sand Casitng Material: Cast Ductile Iron, Cast Gray Iron. Standards: En124 LOAD CLASSES En 124 A15KN test load Areas which can be used by pedestruabs and pedal cylists En 124 B125KN test load For use in footways, car parks and parking decks. En 124 C250KN test load […]
Pump parts and accessories are components and devices used in the construction of pumps. A pump part may include an upstream and downstream bend element, sidestream, inlet guide vane, impeller, front and rear seals, diffuser, and an exit element such as a volute. Pump parts and accessories include gas pump parts, water pump parts, and sump pump parts. Other pump parts and accessories for water pumps include the shaft and impeller that spin on the sealed bearing, which is the part that usually wears out.
A193 bolt A194 Nut. Pls visit the document to get the standard. Our factory can supply qualitied bolt & nut, The Standard can be applied to : Bolt: DIN 6914/ DIN 6915/ DIN 6916 Nut: DIN 931/ DIN 601/ DIN 7790/ DIN934/ DIN 555 BS1083/ BS 1768/ BS 1769 ASTM A193-B7/ ASTM A194-2H ISO 4014 […]
Based ISO9001 quality system, we adopt many processes to control the quality of sand casting and investment casting process. From the raw material to final casting products, we monitor everything of sand casting and investment casting process. How to control the quality? The necessary facilities will be widely used in every program: 1. Raw Material Quality […]
This series butterfly valves are suitable to be used for industrial pipe line as two way opeing closing and regulating devices. The scope of requilation are from 40 to 90. This butterfly valves is designed by ourselves depending on manufacturing technology of mode LTD of Japen.
Features Specifications:
1) size :50mm-800mm
2) body: Cast iron/ductile iron
3) seat : EPDM/NBR
4) disc: ductile iron/Cast iron
5) Pressure: PN10/PN16 6) GB/GOST