Casting Technology, include casting methods, casting material and casting standards.
In a low-alloy steel casting, the alloying elements are present in percentages greater than the following: Mn, 1.00; Si, 0.70; Cu, 0.50; Cr, 0.25; Mo, 0.10; V, 0.05; W, 0.05; and Ti, 0.05. Limitations on phosphorus and sulfur contents apply to low-alloy steels as well as carbon steels unless they are specified to be different […]
Carbon Steel ANSI 1030( 2A, 2Q, IC1030), 1040(3A,3Q, IC1040), 1050(4A,4Q, IC1050) in ASTM A732
Carbon Steel 1020 , 1A, IC1020 in ASTM A732
CD3MN is a Fe-Cr-Ni-Mo duplex stainless steel
Stainless steel CF3(SS304L) in ASTM A351, ASTM A743 and ASTM A744 standard.
Duplex Stainless Steel CD4MCu (UNS J93370) in ASMT A351 and ASTM A890
Precipitation-Hardening Stainless Steel CB7CU-1 (17-4PH) in ASTM A747
Carbon Steel WCA in ASTM A216 for casting purpose
ASTM A216 Grade WCB carbon steel for casting purpose, chemistry and mechanical property
Abrasion-Resistant Cast Iron ASTM A532 Class II type A Designation 12% Cr
Stainless Steel CF8 (SS304) in ASTM A743, ASTM A351 and ASTM A744
What is Green Sand Casting? Green Sand Casting is mainly differed with resin sand casting . The mould sand is taken from rivers, and then put some others in sand to increase their viscidity. Green sand is an aggregate of sand, bentonite clay, pulverized coal and water. Its principal use is in making molds for […]
Grey Iron Specifications DIN EN1561. Compare GG serires with EN-JL grades. this material is suitable to sand casting production. Grey Cast iron is a casting alloy, iron and carbon based, the latter element being present mainly in the form of lamellar graphite particles. The properties of grey cast iron depend on the form and distribution of […]
Stainless Steel include austenitic stainless steel martensitic stainless steel and ferric stainless steel. this material is suitalbe to sand casting and investment casting method. Austenitic steels have austenite as their primary phase
BS EN877 Cast iron pipes and fittings, their joints and accessories for the evacuation of water from building. Requirements, test methods and quality assurance This European Standard applies to cast iron pipeline components used for the construction of discharge systems for buildings and of drains, normally as gravity systems.
Grey Cast Iron (Gray iron) HT200, HT250, HT300, HT350 in Chinese Standard GB/T 9439
Carbon steel have a good content of carbon, so it is easy to casting. especially A216 WCB. It is important to clarify the meaning of carbon steel in the generic sense and in the more narrow context used in this report. The term steel is usually taken to mean an iron-based alloy containing carbon in […]
Duplex Stainless steel has two phase micro-structure consisting of grains of Ferritic and Austenitic stainless steel. It is mainly used in pump fittings and oil field. Casting Quality Industrial can produce SAF2205 DUPLEX STAINLESS STEEL castings.
Cast Iron is individed to four types: gray iron, ductile iron, malleable iron, vermicular cast iron, abrasion-resistant cast iron and corrosion resistant cast iron. Generally, we mainly use sand casting method to make iron castings, such as green sand casting, resin sand casting, Sodium silicate sand casting , lost foam casting and centrifugal casting. Gray […]
ASTM A995/A995M for Castings, Austenitic-Ferritic (Duplex) Stainless Steel