Pump Parts
Method: Sand Casting, Investment Casting Material: Cast Iron, ductile iron, gray iron, Cast steel. Pump parts and accessories are components and devices used in the construction of pumps. A pump part may include an upstream and
Products
Casting Products, such as sand castings, invesment castings, die castings and other castings.
Round Manhole Cover
Method: Sand Casting, Green Sand Casting , lost foam casting or Resin Sand Casitng Material: Cast Ductile Iron, Cast Gray Iron. Standards: En124 LOAD CLASSES En 124 A15KN test load Areas which can be used by pedestruabs and pedal cylists En 124 B125KN test load For use in footways, car parks and parking decks. En […]
Casted Valve Bonnet
Method: Sand Casting, Investment Casting or Lost Foam Casting Materal: Carbon Steel, Ductile Iron, Gray Iron and stainless steel. A Valve bonnet acts as a cover on the valve body. Generally made by casting ( Sand Casting or Invesment Casting). It is commonly semi-permanently screwed into the valve body. During manufacture of the valve, the […]
Ductile Iron Pipe Fittings
Method: Sand Casting, Lost Foam Casting Material: ductile iron GGG40, GGG50 Design Standard: EN545, ISO2531, BS4772, AWWA C153 Flange type connection.
Stainless Steel Valve Body
Casting Method: Investment Casting ( Lost Wax Casting or Precision Casting) Material: Casted Stainless Steel, Casted Steel. Ball valve body casting with bolt hole. The strictly tolerance keep a good dimension, and also cut more cost in machining.
U Bolt with Nut
Specifications: 1) Dimensions: Max M200 2) Material: mild steel, alloy steel, 1035 steel, 1045 steel, 5140 steel 3) Heat treated to meet various grades of 8.8 and 10.9
Steel Anchors
Steel Anchor products as following: 1.TYPE A.B.C HALL ANCHOR 2. JAPAN STOCKLESS ANCHOR 3. POOL ANCHOR 4. MATROSOV ANCHOR 5. U.S.N. STOCKLESS ANCHOR 6. SPEKE ANCHOR 7. HHP STOCKLESS ANCHOR(AC-14) 8. DANFORTH ANCHOR 9. TWO FLUKES ANCHOR 10. TYPE M SPEKE ANCHOR 11. LIGHT WEIGHT ANCHOR 12. ADMIRALTY ANCHOR 13. BALDT STOCKLESS ANCHOR 14. […]
Manhole Cover
Mothed: Sand Casting, Green Sand Casting or Resin Sand Casitng Material: Cast Ductile Iron, Cast Gray Iron. Standards: En124 LOAD CLASSES En 124 A15KN test load Areas which can be used by pedestruabs and pedal cylists En 124 B125KN test load For use in footways, car parks and parking decks. En 124 C250KN test load […]
Cast Steel Pump Body
Pump parts and accessories are components and devices used in the construction of pumps. A pump part may include an upstream and downstream bend element, sidestream, inlet guide vane, impeller, front and rear seals, diffuser, and an exit element such as a volute. Pump parts and accessories include gas pump parts, water pump parts, and sump pump parts. Other pump parts and accessories for water pumps include the shaft and impeller that spin on the sealed bearing, which is the part that usually wears out.
Hex Bolt and Heavy Hex Nut
A193 bolt A194 Nut. Pls visit the document to get the standard. Our factory can supply qualitied bolt & nut, The Standard can be applied to : Bolt: DIN 6914/ DIN 6915/ DIN 6916 Nut: DIN 931/ DIN 601/ DIN 7790/ DIN934/ DIN 555 BS1083/ BS 1768/ BS 1769 ASTM A193-B7/ ASTM A194-2H ISO 4014 […]
Butterfly Valves
This series butterfly valves are suitable to be used for industrial pipe line as two way opeing closing and regulating devices. The scope of requilation are from 40 to 90. This butterfly valves is designed by ourselves depending on manufacturing technology of mode LTD of Japen.
Wafer type Butterfly Valve
Features Specifications:
1) size :50mm-800mm
2) body: Cast iron/ductile iron
3) seat : EPDM/NBR
4) disc: ductile iron/Cast iron
5) Pressure: PN10/PN16 6) GB/GOST
Flanged type Central Line Butterfly Valve
Product Introduction: Flanged connection central line butterfly valve is our newest patent product. Possessing some virtue of eccentric flanged butterfly valve and wafer central line butterfly valve. Filling up the blank between eccentric flanged butterfly valve and wafer central line butterfly valve.
Break Disc-steering system
Break disc-steering system Sand casted ductile iron parts, with CNC machining.
Casted Valve Handwheel
Method: Sand Casting, Investment Casting Material: Ductile Iron, Gray Iron, carbon steel Sand Casting , the material generally is ductile iron or gray iron. If you need steel casting , we also can do it. Based your drawings, we can give you a better products.
You can contact with us:
Qingdao Casting Quality Industrial Co., Ltd RM0329, No. 51 Taiping Road, Qingdao City, Shandong Province, China (266071) Tel:+86 532 82972967 Fax:+86 532 82972913 [email protected] Qingdao, China
Profile of Casting Quality
As a professional casting manufacture,we pay much attention to the quality and inspection , Our products are much more casting and forging parts.We are mainly do sand casting ,lost wax casting and die casting .Today, its products are marketed globally through many countries.