Introduction
C97300 is a leaded bronze sand-casting grade covered by ASTM B584. Typical applications include ornamental castings, statuary and builders hardware.
| Field | Value |
|---|---|
| Designation | C97300 |
| Material Type | Bronze |
| Sub Type | Leaded Bronze |
| Product Form | casting |
Manufacturing Process
Sand Casting
Equivalent Materials
N/A
Similar Materials
N/A
Reference Standards
| Standard | Standard Title | Edition | Specification | Identifier |
|---|---|---|---|---|
| ASTM B584 | Standard Specification for Copper Alloy Sand Castings for General Applications | 14 | C97300 | UNS C97300, source_designation 12% leaded nickel silver |
Related Casting Products
Physical Properties
N/A
Chemical Composition
| Element | ASTM B584Edition 14 · wt.% |
|---|---|
| Cu | 53.0–58.0 |
| Zn | 17.0–25.0 |
| Sn | 1.5–3.0 |
| Pb | 8.0–11.0 |
| Fe | ≤ 1.5 |
| Al | ≤ 0.005 |
| Mn | ≤ 0.50 |
| Si | ≤ 0.15 |
| P | ≤ 0.05 |
| Sb | ≤ 0.35 |
| S | ≤ 0.08 |
| Ni+Co | 11.0–14.0[1] |
Notes
ASTM B584 · Edition 14
[1] Ni+Co: Nickel including cobalt; combined limit
Heat Treatment
ASTM B584–14
N/A
Mechanical Properties
Core Mechanical Properties
Notes
ASTM B584 · Edition 14
[1] Tensile Strength: inch-pound
[2] Yield Strength: inch-pound; 0.5% extension under load
Welding Conditions
N/A
Applications
Leaded bronze ASTM B584 C97300 is used for ornamental castings, statuary and builders hardware. These are appearance-oriented applications that also require attention to the intended environment and finished surface. Other cast components used in this material family include building hardware, decorative fittings, plaques, door and window hardware, furniture components and sculptural castings.
Typical settings include public buildings, commercial interiors and ornamental hardware manufacture. Sanitary, marine-furniture and other equipment uses remain grade-specific; these cast copper-nickel-zinc alloys are not nickel-base turbine alloys.
Need C97300 Castings?
Contact us for casting and machining inquiries.
Email Us for a QuoteLast Updated: November 6, 2026