Introduction
GE270 is a carbon steel casting grade covered by EN 10293. Typical family applications include housings, supports, brackets, frames and connecting parts.
| Field | Value |
|---|---|
| Designation | GE270 (EN 1.0454) |
| Material Type | Carbon Steel |
| Sub Type | — |
| Product Form | casting |
Manufacturing Process
Investment Casting
Shell Molding Casting
Sand Casting
Equivalent Materials
N/A
Similar Materials
N/A
Reference Standards
| Standard | Standard Title | Edition | Specification | Identifier |
|---|---|---|---|---|
| EN 10293 | Steel castings — Steel castings for general engineering uses | 2015 | GE270 | — |
Related Casting Products
Physical Properties
N/A
Chemical Composition
| Element | EN 10293Edition 2015 · wt.%Cast analysis |
|---|---|
| P | ≤ 0.035 |
| S | ≤ 0.030 |
| Cr | ≤ 0.30[1] |
| Ni | ≤ 0.40[1] |
| Mo | ≤ 0.12[1] |
| Cu | ≤ 0.30[1] |
| V | ≤ 0.03[1] |
Notes
EN 10293 · Edition 2015
[1] Cr/Ni/Mo/Cu/V: Applies only where unspecified in unless otherwise agreed; no intentional addition except for finishing the heat.
Heat Treatment
EN 10293–2015 · +NT
| Step | Operation | Temperature | Cooling |
|---|---|---|---|
| 1 | Informative: normalizing | 880–960 °C | — |
| 2 | Informative: tempering | 560–620 °C | — |
Mechanical Properties
Core Mechanical Properties
EN 10293 — 2015 · Table 3 — Normative
| Property | +NT |
|---|---|
| Yield Strength (Rp0.2) | ≥ 270 MPa |
| Tensile Strength | ≥ 480 MPa |
| Elongation | ≥ 22 % |
| Impact Energy | ≥ 29 J |
- wall thickness ≤ 300 mm; Test block of relevant thickness; maximum test-block wall thickness 150 mm; Room temperature; Properties apply to the casting up to the specified maximum wall thickness; above this, foreseeable lowering shall be agreed.
Welding Conditions
EN 10293–2015
| Requirement | Value |
|---|---|
| Preheat | 150–300 °C[1] |
| Interpass Temperature | ≤ 350 °C |
| Post-weld Heat Treatment | Post-weld temperature 20–50 °C below the base-material tempering temperature |
Notes
EN 10293 · Edition 2015
[1] Preheat: Preheat depends on casting geometry, thickness and climatic conditions.
Applications
For carbon steel EN 10293 GE270, typical cast components in this material family include housings, supports, brackets, frames and connecting parts. Typical settings include industrial, agricultural, construction and railway equipment, as well as machinery replacement and maintenance. Pressure-retaining, low-temperature or lifting duties require their own component specification.
Need GE270 Castings?
Contact us for casting and machining inquiries.
Email Us for a QuoteLast Updated: November 6, 2026