Casting is a manufactureing process in which molten metal is poured or injected and allowed to solidify in a suitable shaped mold cavity. During or after cooling, the cast part is removed from the mold and then processed for delivery. Casting processes and cast-material technologies vary from simple to highly complex. Material and process selection […]
Check Valve Body Casting made by Resion Sand Casting.
This specification covers carbon steel castings for valves, flanges, fittings, or other pressure-containing parts for high-temperature service and of quality suitable for assembly with other castings or wrought-steel parts by fusion welding. Covered here are three grades of carbon steel (Grades WCA, WCB, and WCC), the selection of which shall depend on the design and […]
Astm A536-84(reapproved 1999) Ductile Iron Castings
ASTM A351/A351M:standard specification for stainless steel casting
Fence Fittings by Sand Casting, Investment Casting.
Method: Investment Casting, Lost Wax Casting, Precision Casting Material: Stainless Steel CF8,CF8M Thread: ASTM B1.20.1, NPT, BS21
Iron Comparison- Gray Iron and Ductile Iron in China, Janpen, American, Germany and others countries
gear casting material carbon Steel, Ductile iron or Stainless Steel, made by sand casting or investment casting.
Method: Sand Casting, Green Sand Casting or Resin Sand Casitng Material: Cast Ductile Iron, Cast Gray Iron. Standards: En124 General Road gullies, which require a hinged grating on top are designed to collect surface water from roads, parks, etc. Because of the high outlet position, the gully collects any silt or debris as the water […]
Method: Sand Casting, Resin Sand Casting, Green Sand Casting Material: Steel, Alloy Steel, Cast Iron. Weight: Max to 2Tons. Pump parts and accessories are components and devices used in the construction of pumps. A pump part may include an upstream and downstream bend element, sidestream, inlet guide vane, impeller, front and rear seals, diffuse, and […]
Method: Sand Casting Material: Malleable iron KTH300-6 Standard: EN10242, DIN, BS, ASTM
Method: Sand Casting, Investment Casting Material: Cast Iron, ductile iron, gray iron, Cast steel. Pump parts and accessories are components and devices used in the construction of pumps. A pump part may include an upstream and
Method: Sand Casting, Green Sand Casting , lost foam casting or Resin Sand Casitng Material: Cast Ductile Iron, Cast Gray Iron. Standards: En124 LOAD CLASSES En 124 A15KN test load Areas which can be used by pedestruabs and pedal cylists En 124 B125KN test load For use in footways, car parks and parking decks. En […]
Method: Sand Casting, Investment Casting or Lost Foam Casting Materal: Carbon Steel, Ductile Iron, Gray Iron and stainless steel. A Valve bonnet acts as a cover on the valve body. Generally made by casting ( Sand Casting or Invesment Casting). It is commonly semi-permanently screwed into the valve body. During manufacture of the valve, the […]
Method: Sand Casting, Lost Foam Casting Material: ductile iron GGG40, GGG50 Design Standard: EN545, ISO2531, BS4772, AWWA C153 Flange type connection.
Casting Method: Investment Casting ( Lost Wax Casting or Precision Casting) Material: Casted Stainless Steel, Casted Steel. Ball valve body casting with bolt hole. The strictly tolerance keep a good dimension, and also cut more cost in machining.
Specifications: 1) Dimensions: Max M200 2) Material: mild steel, alloy steel, 1035 steel, 1045 steel, 5140 steel 3) Heat treated to meet various grades of 8.8 and 10.9
Steel Anchor products as following: 1.TYPE A.B.C HALL ANCHOR 2. JAPAN STOCKLESS ANCHOR 3. POOL ANCHOR 4. MATROSOV ANCHOR 5. U.S.N. STOCKLESS ANCHOR 6. SPEKE ANCHOR 7. HHP STOCKLESS ANCHOR(AC-14) 8. DANFORTH ANCHOR 9. TWO FLUKES ANCHOR 10. TYPE M SPEKE ANCHOR 11. LIGHT WEIGHT ANCHOR 12. ADMIRALTY ANCHOR 13. BALDT STOCKLESS ANCHOR 14. […]
Product Analysis is the process of identifying, looking at or disassembling a product and identifying its main features. The aim is to understand more about a product and improve it in the future. Many factors influence the development of a product, some are listed below.